OWON HDS2102 / HDS2102S 100 MHz 2 Channel Handheld Oscilloscope
OWON HDS2102/HDS2102S 100 MHz 2-CH handheld oscilloscope + 20,000-count DMM; HDS2102S adds a 25 MHz generator. 1 GSa/s, 8K memory, USB-C, 600 V CAT III.
A 100 MHz oscilloscope, a 20,000-count multimeter and a waveform generator in one hand
The OWON HDS2102 combines a 100 MHz, 2-channel digital oscilloscope (up to 1 GSa/s, 8K memory, 10,000 wfrms/s) with a full 20,000-count digital multimeter in one rugged, battery-powered handheld — the tool you reach for when the work is in the field, the vehicle bay or the classroom rather than on the bench.
Two versions are available from the dropdown above. The HDS2102 is the 2-in-1 scope + meter; the HDS2102S adds a built-in 25 MHz arbitrary/function generator so you can inject a signal as well as measure one. Both share the same 3.5″ colour display, 18650 rechargeable battery, USB-C and 600 V CAT III safety rating.
Three instruments in one hand
A 100 MHz 2-channel oscilloscope and a 20,000-count True-RMS multimeter, plus a 25 MHz waveform generator on the HDS2102S, share the same display and battery — no need to carry, power and set up separate tools on the job.
One tool, three instruments
100 MHz oscilloscope
A 2-channel digital scope at 100 MHz and up to 1 GSa/s, with 8K memory, 10,000 wfrms/s, auto measurements, cursors and one-key Autoset.
True-RMS multimeter
An independent 20,000-count digital multimeter: DC/AC voltage to 1000 V/750 V, current to 10 A, resistance, capacitance, diode and continuity.
25 MHz generator (HDS2102S)
On the HDS2102S: a 25 MHz arbitrary/function generator — sine, square, ramp, pulse and 8 special waveforms at 125 MSa/s, 14-bit.
All-day battery · USB-C
A rechargeable 18650 battery runs 3–6 hours; charge and talk to a PC over a single USB-C connection with SCPI control.
Ideal for
- Field-service & maintenance engineers who need one portable tool
- Automotive & industrial technicians — sensor, bus and ignition signals
- Installers and on-site troubleshooting up to 600 V CAT III
- Education, training labs, makers and repair benches
Typical applications
- General electronics, audio & power-supply debugging at 100 MHz
- Automotive sensor, bus & ignition waveform capture
- Multimeter measurements and quick checks in one instrument
- Signal injection & stimulus with the built-in 25 MHz generator
HDS2102 or HDS2102S
Both are selected from the variant dropdown on this product. They are the same 100 MHz handheld — the HDS2102S simply adds the built-in 25 MHz waveform generator.
| Specification | HDS2102 | HDS2102S |
|---|---|---|
| Oscilloscope | 100 MHz · 2 CH | 100 MHz · 2 CH |
| Real-time sample rate | 1 GSa/s | 1 GSa/s |
| Digital multimeter | 20,000-count True-RMS | 20,000-count True-RMS |
| Waveform generator | — | 25 MHz arb / function |
| Display / battery / safety | 3.5″ colour · 18650 · 600 V CAT III | 3.5″ colour · 18650 · 600 V CAT III |
HDS2102 from every angle
HDS2102 & HDS2102S specifications
| Specification | HDS2102 | HDS2102S |
|---|---|---|
| Oscilloscope | ||
| Bandwidth | 100 MHz | 100 MHz |
| Channels | 2 analog | 2 analog |
| Real-time sample rate | 1 GSa/s | 1 GSa/s |
| Memory depth | 8 K | 8 K |
| Waveform capture rate | 10,000 wfrms/s | 10,000 wfrms/s |
| Vertical resolution | 8-bit | 8-bit |
| Vertical sensitivity | 10 mV/div – 10 V/div | 10 mV/div – 10 V/div |
| Input impedance | 1 MΩ ± 2%, ∥ 16 pF | 1 MΩ ± 2%, ∥ 16 pF |
| Coupling / trigger | DC / AC / GND · Edge (Auto/Normal/Single) | DC / AC / GND · Edge (Auto/Normal/Single) |
| Max input voltage | 400 V (DC+AC, pk-pk) | 400 V (DC+AC, pk-pk) |
| Digital multimeter | ||
| Resolution | 20,000 counts | 20,000 counts |
| DC voltage | up to 1000 V | up to 1000 V |
| AC voltage | up to 750 V (True-RMS) | up to 750 V (True-RMS) |
| Current (DC/AC) | up to 10 A | up to 10 A |
| Resistance / capacitance | Yes | Yes |
| Diode / continuity | Yes | Yes |
| Waveform generator | ||
| Sine output | — | up to 25 MHz |
| Square / pulse / arbitrary | — | up to 5 MHz |
| Ramp output | — | up to 1 MHz |
| Output amplitude | — | 20 mVpp – 5 Vpp |
| Generator sample rate / resolution | — | 125 MSa/s · 14-bit |
| General | ||
| Display | 3.5″ (320 × 240) TFT colour LCD | 3.5″ (320 × 240) TFT colour LCD |
| Calibration output | 1 kHz square wave | 1 kHz square wave |
| Battery | 18650 lithium, 3–6 h | 18650 lithium, 3–6 h |
| Interface | USB Type-C (charge + PC / SCPI) | USB Type-C (charge + PC / SCPI) |
| Safety rating | 600 V CAT III | 600 V CAT III |
| Dimensions / weight | 198 × 96 × 38 mm · ≈ 0.6 kg | 198 × 96 × 38 mm · ≈ 0.6 kg |
From the official OWON HDS200 datasheet; subject to change, errors & omissions excepted.
Supplied with every HDS2102
Exact contents may vary — see the quick guide for the full packing list.
Your OWON partner in Europe
Genuine OWON instruments, shipped from within the EU with full support and warranty.
EU shipping
Genuine OWON instruments shipped from within the European Union.
Warranty & support
Full manufacturer warranty and technical support from our team.
CE & RoHS compliant
Instruments that meet European safety and compliance standards.
Expert advice
Not sure which model? Our team helps you choose the right instrument.
HDS2102 or HDS2102S — not sure which?
Choose the plain HDS2102 for scope + meter, or the HDS2102S if you also need to generate a signal. Pick the variant above, or ask us.